Behlen 62074482 - Manual (Page 2)

How to adjust the Latch Plate height
If the latch plates are not adjusted far
enough down, loosen the nuts so that the
plates drop down. Ideal setting is ¾” from
the top of the door tubes to the bottom of
the latch plates (see diagram at left).
How to mount the headgate to a
Big Valley Squeeze Chute.
To mount this headgate to a Big
Valley Squeeze Chute, 5/8” long
spacers must be used between the
headgate and the squeeze chute.
This will prevent the tie bar on top of
the headgate from hitting the frame of
the squeeze chute. It works best to
attach the top holes first and then the
bottom holes.
3/4”
F-19781 12-12-01
Side View of
Headgate
5/8”
Spacer