Installation, Operation for cascade – Avlink HSC-12 User Manual

Page 2

SIDE VIEW

1. Input Power Jack
2. “HDMI In” Port
3. “HDMI Out1” Port
4. “HDMI Out2” Port

Installation

1. Turn off the DVD player/TV receiver and monitors.
2. Connect the HDMI male extension cable between the

DVD player/TV receiver and the “HDMI In” port of
Distribution Amplifier.

3. Connect the HDMI male/female extension cables

between the monitors and the “HDMI Out” ports of
Distribution Amplifier.

4. Connect the power cord and turn on the Distribution

Amplifier.

5. Turn on the DVD player/TV receiver and monitors.
Note:

Have to install all TVs with the same resolution limited.

-3-

Operation for cascade:

1. The function to display identical image on more

monitors, you have to attach another Distribution
Amplifier.

2. Connect the HDMI male/female extension cable

between the former Distribution Amplifier of the “HDMI
Out 1” port and the latter Distribution Amplifier of the
“HDMI In” port.

Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.

P.S.: The example cascades the 2 and 4 ports Distribution
Amplifier; however, you can cascade the HDMI Distribution
Amplifier with demanded port.

Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.

-4-

HDMI
Out1” Port

HDMI
Out2” Port

Input
Power Jack

DVD

HSC-12