AquaCraft Mini Rio - Manual (Page 7)

7
1. Remove the cowl by rotating the
lock near the front of the windshield.
2. Remove the cowl.
3. After removing the cowl, grab
the bar on the top of the round
opening covers and rotate to
remove the covers.
4. Remove the battery pack from the boat via the front opening.
5. Plug the charger into an
automobile’s 12 volt power outlet.
Once the charger is plugged
in it will start to beep and the
light on the front will begin to
fl ash. Place the charger outside
your automobile.
6. Join the battery and charger connectors. The connectors are
designed to only connect one way to prevent the battery from being
hooked up backwards.
ACCESSING AND CHARGING THE BATTERY PACK
Note: When charging your battery pack, be sure to follow the charging
recommendations that come with your charger instructions.