AquaCraft Mini Rio - Manual (Page 5)

5
ASSEMBLY
1. After removing the transmitter and
transmitter antenna from the box,
line up the antenna to the hole in
the top of the transmitter.
2. Slip the antenna in and lightly screw the antenna into the transmitter.
Do not over tighten. Give the antenna a light tug to make sure it is
properly installed.
1. Slide off the battery door from the
bottom of the transmitter.
2. Install 8“AA” batteries into the transmitter in the confi guration molded
into the battery fl oor.
3. Reinstall the battery door onto the
bottom of the transmitter.
INSTALLING THE HAND-HELD TRANSMITTER ANTENNA
INSTALLING THE TRANSMITTER BATTERIES