Crestron electronic DigitalMedia Repeater DM-DR - Manual (Page 16)

DigitalMedia
™
Repeater Crestron DM-DR
Hardware Connections for the DM-DR
DISPLAY DM:
TO INPUT OF A DM
RECEIVER,
SWITCHER, OR
OTHER DEVICE VIA
DM-CBL OR
CRESCAT-D CABLE
DISPLAY NETWORK:
TO DM SWITCHER
AND OTHER DMNET
DEVICES
SOURCE NETWORK:
TO DM SWITCHER
AND OTHER DMNET
DEVICES
SOURCE DM:
TO OUTPUT OF A
DM TRANSMITTER,
SWITCHER, OR
OTHER DEVICE VIA
DM-CBL OR
CRESCAT-D CABLE
NOTE: Ensure the unit is properly grounded.
NOTE: For optimum performance, Crestron strongly recommends using
DM-CBL DigitalMedia cable, available from Crestron. CresCAT-D or
high-quality CAT5e/CAT6 wiring may also be used with varying
performance. Do NOT use low-skew cable.
12
• DigitalMedia ™ Repeater: DM-DR Operations & Installation Guide – DOC. 6745A