Digitalmedia, Repeater crestron dm-dr, Connectors – Crestron electronic DigitalMedia Repeater DM-DR User Manual
Page 10: Controls & indicators description
DigitalMedia
™
Repeater
Crestron DM-DR
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
6 SOURCE
2, 3
(1) DM port composed of (2)
8-pin RJ-45 female
Connects to DM output of a
DM switcher, transmitter, or
other DM device via DM-CBL
or CresCAT-D cable
4
7
SOURCE 24 A B G
5, 6
(1) 4-pin 3.5mm detachable
terminal block, DMNet port.
Connects to DMNet port of a
DM switcher, transmitter, or
other DM device via DM-CBL
or CresCAT-D cable
4
1. Interface connectors for SOURCE/DISPLAY 24 A B G ports are provided with
the unit.
2. The source and display ports consist of two separate RJ-45 ports that are labeled
D and M. The D port carries video signal. The M port carries data. Refer to the
tables below, and on the following page, for the wires pin assignments.
D Port
PIN #
SIGNAL
DESCRIPTION
1
DATA D0+
HDMI Blue
2
DATA D0-
HDMI Blue
4
DATA D1+
HDMI Green
5
DATA D1-
HDMI Green
7
DATA D2+
HDMI Red
8
DATA D2-
HDMI Red
3 CLK-
HDMI
Clock
6
CLK +
HDMI Clock
6
• DigitalMedia
™
Repeater: DM-DR
Operations & Installation Guide – DOC. 6745A