Antari HZ-350 - Manual (Page 6)

6
Press Up/Timer button to execute the interval/duration timing set and press Stop
to stop.
OUTPUT UNDER CONTINUOUS OUTPUT MODE
Press Down/On button to output continuously until Stop button is pressed.
REMOTE CONTROL OPERATION
W-1:The wireless remote control W-1 consists of a transmitter equipped with two buttons
for fog on and off, and a receiver pre-attached to HZ-350.
* Transmitter
With the transmitter it is possible to emit fog via radio over a distance of up to 50 meters.
The transmitter is compatible to any receiver of HZ-350 and can control an unlimited
number of machines in parallel.
Press the button “A”, to emit fog. As control, the LED on the
transmitter is lit . To stop the fog output, press the button “B”.
* Receiver
The receiver is tested and built in HZ-350. Please do not try to remove it. The receiver
responds to up to 5 different transmitters that are registered with the machine. The included
transmitter has been registered with the machine before shipment. It can be directly
operated without any start-up setting.
Battery change on the transmitter