Antari HZ-350 - Manual (Page 3)

3
ANTARI HZ-350 HAZE MACHINE
INTRODUCTION
Thank you for choosing Antari HZ-350 Haze Machine. Prior to use, it is suggested to read
the instructions carefully and thoroughly. By following the instructions listed in this user
manual, you can look forward to the best haze effect and the most reliable performance of
your Antari HZ-350 Hazer for years to come.
Please follow these operation and safety instructions to ensure a long
and safe life for your HZ-350.
DANGER OF ELECTRIC SHOCK
․ Keep this device dry.
․ Use grounded electrical outlet. Prior to use, make sure that the unit is installed at the
rated voltage.
․ Always unplug the hazer before filling haze fluid.
․ Turn off or unplug when not in use.
․ This machine is not water-proof. If moisture, water, or haze fluid gets inside the
housing, immediately unplug the unit. After unplugging, wipe the unit with dry clothe
and leave the unit stand still for a while. If any problem while use again, please contact
a service technician or your ANTARI dealer.
DANGER OF BURN
․ No user serviceable and modifiable parts inside. Do not disassemble the housing and
do any modification; otherwise damage of the device or danger of burn may be
caused.
․ For adult use only. Hazer must be installed out of the reach of children. Never leave
the unit running unattended.
․ Position the hazer in well-ventilated area. Please leave at least 20cm spaces
surrounding the machine.
․ Never aim the machine at open flames or close to flammable articles.
․ Never add flammable liquids of any kind (oil, gas, perfume) to the haze fluid.
․ Use only dealer recommended genuine Antari haze fluid (HZL). Please do not use any
other liquid which may cause erosion of inner parts.
․ If your Antari HZ-350 Hazer fails to work properly, stop using immediately. Contact
!