34 picture image, Picture image adjustments – Canon LV-7565F User Manual

Page 34

PICTURE IMAGE

Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
IMAGE ADJUST Menu icon.

Press POINT UP/DOWN button to move a red frame pointer to
item that you want to adjust and then press SET button. Level of
each item is displayed. Adjust each level by pressing POINT
LEFT/RIGHT button(s).

IMAGE ADJUST MENU

Press POINT LEFT button to decrease contrast, and POINT RIGHT
button to increase contrast. (From 0 to 63.)

Press POINT LEFT button to adjust image darker, and POINT
RIGHT button to adjust brighter. (From 0 to 63.)

Contrast

Brightness

Press POINT LEFT button to lighten color, and POINT RIGHT button
to deeper color. (From 0 to 63.)

Press POINT LEFT button or POINT RIGHT button to obtain proper
color. (From 0 to 63.)

Color

Tint

Color Management

The Color management function can be used to adjust the level,
phase and gamma of the selected display colors on the screen, and
to replace these colors with other colors if required.
The projector lets you replace up to eight colors for each image.
There are preset images for VIDEO mode and preset images for PC,
giving a total of two images.

Press the POINT UP/DOWN button to move the red frame point-
er to "COLOR MANAGEMENT", and then press the SET button.
The COLOR MANAGEMENT menu will appear and pointer
mode will be enabled. The image that was being projected when
the button was pressed will be paused, and the COLOR MAN-
AGEMENT POINTER will appear.

Use the POINT buttons to move the pointer to a section of the
paused image that contains the color that you would like to
adjust, and then press the SET button. The mode will change to
COLOR SELECTION mode, and the color in the center of the
pointer will be selected and adjustment will be possible.

Use the POINT buttons to adjust the level and phase of the
color, and then press the SET button to confirm the setting.
Next, use the POINT buttons to adjust the gamma correction for
the color, and then press the SET button to accept the setting.
When the SET button is pressed, the mode will change to LIST
mode.

COLOR
MANAGEMENT
POINTER

POINTER MODE

Move a red frame pointer to
item to be selected and then
press SET button.

IMAGE ADJUST
Menu icon

Press POINT LEFT/RIGHT buttons
to adjust value.

PICTURE IMAGE ADJUSTMENTS