beautypg.com

23 computer input, Selecting input source, Selecting computer system – Canon LV-7565F User Manual

Page 23: Direct operation, Menu operation

background image

23

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT button on Top Control or on
Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).

INPUT button

Input 1

Input 2

Input 3

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )

Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.

Press POINT UP/DOWN button to move a red arrow pointer to
Input 1 and then press SET button. Source Select Menu will
appear.

1

2

Input 1

INPUT MENU

Move a pointer to source that you want to select and then press
SET button.

3

When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB(PC Digital).

When your computer is connected to INPUT 1 (ANALOG)
terminal, select RGB(Analog).

RGB(Analog)

MENU OPERATION

Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon.

Press POINT UP/DOWN button and a red-arrow icon will
appear. Move arrow to INPUT source that you want to select,
and then press SET button.

1

2

Move a pointer to source
and press SET button.

Source Select Menu

INPUT Menu icon

INPUT Menu icon

Move a pointer (red arrow) to
Input 1 and press SET but-
ton.

RGB(PC Digital)

RGB(Scart)

When video equipment is connected to INPUT 1 (ANALOG)
terminal, select RGB(Scart).

Input 1 is not displayed when the Input 1 is used as
Monitor out.

NOTE

● Input 1 terminal is switchable and can be used as computer input or

monitor output.

RGB(AV HDCP)

Monitor out

If a HDCP-compatible signal source is connected to the INPUT 1
(DIGITAL) terminal, select RGB(AV HDCP).

If the INPUT 1 ANALOG terminal is being used as a MONITOR
OUT terminal, select Monitor out.

NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.