Canon LV-7565F - Manual (Page 17)

17
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
MENU operation. (P18,
19)
MENU BUTTON
BRIGHT BUTTON
READY INDICATOR
SET BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS
LAMP REPLACE INDICATOR
Used to enhance
picture brightness.
(P22)
Lights green when a
projector is ready to be
turned on. And it
flashes green in Power
Management mode.
(P39) Becomes dim when a
projector is turned on.
And bright when a
projector is in stand-by
mode. Turns to yellow when
life of projection lamp
draws to an end. (P44) Flashes red when
internal projector
temperature is too
high. (P42)
Used to select input
source. (P23, 24, 30)
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan image in
DIGITAL ZOOM
+/– mode. (P29)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
Used to execute the
selected item. It is also
used to expand/compress
image in DIGITAL ZOOM
mode. (P29)
Used to turn a projector
on or off. (P20)
Used to adjust zoom.
(P21)
FOCUS BUTTON
Used to adjust focus.
(P21)
ZOOM BUTTON
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P21) AUTO PC ADJ. BUTTON
Used to operate AUTO PC
Adjustment function. (P25)