AltiGen MAXCS 7.0 Update 1 AltiConsole - Manual (Page 7)

AltiConsole Manual 3
C
H A P T E R
2
Installation
The client system must meet the following minimum requirements:
• IBM/PC AT compatible system
• 1 GHz CPU or faster
• Microsoft Windows 7 (32-bit or 64-bit), or Windows 8.1 (64-bit)
• 1 GB Hard Drive Disk Space
• 1 GB RAM
• SVGA monitor (1024x768) with 256-color display, or better
• Keyboard and mouse
Pre-Installation Checklist
Before installing AltiConsole, make sure the following is done:
• The AltiConsole client should be connected to the AltiGen phone
system over the LAN.
• MAXCS ACC or ACM Release 7.0 must be installed on the system to
which the AltiConsole client is connected.
• The system administrator must configure the AltiConsole extension to
enable Multiple Call Waiting as an Answering option, and configure
the extension’s Busy Call Handling and No Answer Handling as
desired.
• The AltiConsole License Key must be enabled.
• Older client programs cannot be installed on the same computer
running ACC/ACM 7.0 client programs.
Installing AltiConsole
1. Insert the MAX CS DVD into the drive.
2. Run Setup.exe from the AltiConsole folder and follow the installation
instructions.