AltiGen IP 710 - Manual (Page 29)

IP 710 Manual
21
Assigning a Local IP Address
To assign an IP address, use the following steps:
1. Ensure that DHCP is disabled.
2. Press the
Menu button, scroll to NETWORK, then press the Enter
button.
3. Scroll to LOCAL ADDRESS, and press
Enter.
4. Use the keys on the dial pad to enter a new IP address, using the * key
to enter periods.
5. Press
Enter.
Assigning a TFTP Server
The default TFTP Server is set to 0.0.0.0.
To assign the TFTP server, use the following steps:
1. Press the
Menu button.
2. Use / to select
System, then press the Enter button.
3. Scroll to
TFTP Server, and press Enter.
4. Use the keys on the dial pad to enter the new TFTP server address,
using the * key to enter periods, then press
Enter.
Updating Phone Firmware
To update the phone firmware directly from the IP 710 phone, follow these
steps:
1. Press the
Menu button.
2. Use the  button to scroll to System, then press the
Enter button.
3. Scroll to TFTP Server, then press
Enter.
4. Enter the TFTP server address, using the * key to input periods.
5. The IP 710 will download the firmware from the TFTP server on the
next reboot.
6. Reboot by unplugging and replugging the power cable OR by
pressing * *
3 and the Enter button.