AltiGen IP 710 - Manual (Page 13)

IP 710 Manual
5
Note: * Indicates a normal operating mode key feature, which is
available only after registering the IP 710 with the phone server
and logged in as an extension.
16
Release Releases a call, exits from the menu, releases phone
from an active state, rejects an incoming call.
17
Redial* Redials up to last 16 calls and up to 32 digits.
18
SpeedDial* Displays a list of Station Speed Dial entries
configured through MaxCommunicator/MaxAgent
or MaxAdmin. To make an outgoing call, use the /
buttons to select a Speed Dial entry, then press
Enter.
19
Call Log* Displays the caller IDs of up to 99 incoming calls.
To dial, use the / buttons to select a call log
entry, then press
Enter.
20
Flash* For system feature codes that need a flash to
complete.
21
Transfer* Transfers a call.
22
Volume Adjusts volume of ringer, speaker, handset and
headset.
23
Dial Pad Functions like a dial pad on a traditional telephone
and is also used for inputting some settings that are
accessed through the phone’s menu.