Device management, Adding a device, 4 device management – Agasio A501W User Manual
Page 4: 1 adding a device
a successful installation, run the application and the user interface will be shown as Figure
1.
4 Device Management
The following steps are required before using this application:
1） Plan and install the IP Camera(s) which intend to be monitored.
2） Login to the IP Camera(s) by web browser and set the IP address, port, username &
password, alarm setting, system time etc.
3） DDNS setting is a plus whenever you intent to visit the devices by WAN.
In this application, Device Management tab is shown as Figure 2:
Figure 2: Devices Management
4.1 Adding A Device
1） Basic configuration
Figure 3: Adding A Device tab
Click the
button shown on Figure 2, information of the device will be prompted to