Indicator lights – Acura 2000 Integra Sedan - Owner's Manual User Manual
Page 57
Indicator Lights
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page
.
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page
Parking Brake and
Brake System Indicator
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires, and cause the
Anti-lock brake system to turn off
(see page
).
2. If it remains lit after you release
the parking brake while the engine
is running, or comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
Instruments and Controls
BRAKE
Main Menu
Table of Contents
Main Menu