beautypg.com

Jump starting – Acura 2000 Integra Sedan - Owner's Manual User Manual

Page 231

background image

Jump Starting

3. Connect one jumper cable to the

positive ( + ) terminal on the
booster battery. Connect the other

end to the positive ( + ) terminal
on your Acura's battery.

4. Connect the second jumper cable

to the negative ( — ) terminal on
the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this

jumper cable to any other part of

the engine.

5. If the booster battery is in another

vehicle, have an assistant start
that vehicle and run it at a fast idle.

6. Start your car. If the starter motor

still operates slowly, check the
jumper cable connections to make
sure they have good metal-to-
metal contact.

7. Once your car is running, discon-

nect the negative cable from your
car, then from the booster battery.
Disconnect the positive cable from

your car, then the booster battery.

Taking Care of the Unexpected

BOOSTER BATTERY

Main Menu

Table of Contents

Main Menu