Acura 2000 Integra Sedan - Owner's Manual - Manual (Page 183)

Brake and Clutch Fluid
Always use Genuine Honda DOT 3
brake fluid. If it is not available, you
should use only DOT 3 or DOT 4
fluid, from a sealed container, as a
temporary replacement. However,
the use of any non-Honda brake fluid
can cause corrosion and decrease
the life of the system. Have the
brake system flushed and refilled
with Honda DOT 3 brake fluid as
soon as possible.
Brake fluid marked DOT 5 is not
compatible with your car's braking
system and can cause extensive
damage.
Brake System
The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the M I N mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.
Maintenance
MAX MIN
Main Menu Table of Contents Main Menu