beautypg.com

Indicator lights – Acura 2003 NSX - Owner's Manual User Manual

Page 54

background image

This indicator has three functions:

It comes on as a reminder that you
have turned off the Traction
Control System.

It flashes when the TCS is
regulating the engine power.

If it comes on and stays on when
the Traction Control System is on,
it indicates that there is a problem
in the TCS.

This light also comes on when you
turn the ignition ON (II) and goes off
after the engine starts. See page

for more information on the

TCS.

The appropriate light comes on in
this display if the trunk, the roof
panel, the rear window, or either
door is not closed tightly. If a brake
light does not work, the

indicator comes on when you

push the brake pedal with the
ignition switch ON (II).

A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.

All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch to ON (II).

This light normally comes on when
you turn the ignition ON (II) and
goes off after the engine starts. If it
comes on at any other time, there is
a problem in the Electric Power
Steering system. If this happens,
stop the car in a safe place and turn
off the engine. Reset the system by
restarting the engine, and watch the
EPS light. If it does not go off, or
comes back on again while driving,
take the car to your dealer to have it
checked. With the light on, the EPS
is turned off, making the car harder
to steer.

1.

2.

3.

163

Indicator Lights

Instruments and Controls

Door and Lamp Monitor

Traction Control System
(TCS) Indicator

Electric Power Steering
(EPS) Indicator

51

BRAKE

LAMP

Main Menu

Table of Contents