Acura 2003 NSX - Owner's Manual - Manual (Page 208)

To replace the blade:
Check the condition of the wiper
blades at least every six months.
Look for signs of cracking in the
rubber, or areas that are getting
hard. Replace the blades if you find
these signs, or if they leave streaks
and unwiped areas when used.
Turn the ignition ON (II), switch
the wipers to INT or
(low
position), then turn the ignition
OFF when the wiper arm is
approximately midway in its travel.
Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
1.
2.
CONTINUED
Maintenance
Wiper Blades
205
LOCK TAB
Main Menu Table of Contents