Acura 2003 NSX - Owner's Manual - Manual (Page 158)

To shift from Second to
First, press the release button on the
shift lever. With the lever in this
position, the transmission locks in
First gear.
To shift to Second,
press the release button on the side
of the shift lever. This position locks
the transmission in second gear. It
does not downshift to first gear
when you come to a stop. Second
gives you more power when climbing,
and increased engine braking when
going down steep hills. Use second
gear when starting out on a slippery
surface or in deep snow. It will help
reduce wheelspin. If you exceed the maximum speed
for the gear you are in, the engine
speed will enter into the tachometer’s
red zone. If this occurs, you may feel
the engine cut in and out. This is
caused by a limiter in the engine’s
computer controls. The engine will
run normally when you reduce the
RPM below the red zone.
Automatic Transmission
Driving
First (1) Second (2) Engine Speed Limiter
155
Main Menu Table of Contents