Acura 2004 NSX - Owner's Manual - Manual (Page 89)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the Auto Select feature
to find stations in the local area.
Press the A. SELECT Button. The
system goes into scan mode for
several seconds. It stores eight of
the strongest stations on each band
in the preset buttons.
If you do not like the stations Auto
Select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE or SEEK
functions to find stations, then store
them in the preset buttons as
described.
press the A.
SELECT button. This restores the
presets you originally set.
Use the TREB and BASS knobs to
adjust the tone quality to your
linking. Push on the TREB knob to
get both to pop out. The outside ring
changes the bass level and the inner
knob changes the treble level.
The BAL control adjust the sound
balance between the speakers. Push
on the knob so it pops out. Adjust the
side-to-side balance as desired.
When you have finished the
adjustments, push the knobs back in
so there is less chance of
accidentally changing your settings.
You can use the instrument panel
brightness control dial to adjust the
illumination of the audio system (see
page
). The audio system
illuminates when the parking lights
are on, even if the radio is off.
52
To turn off Auto Select,
Playing the Radio
AUTO SELECT
Audio System Lighting
Adjusting the Sound
Comf ort and Convenience Features 86
Push Push
BALANCE
KNOB
BASS KNOB
TREBLE KNOB
Main Menu Table of Contents