beautypg.com

Changing the oil and filter – Acura 2004 NSX - Owner's Manual User Manual

Page 148

background image

Open the engine compartment,
and remove the engine oil fill cap.
Remove the oil drain bolt from the
bottom of the engine. Drain the oil
into an appropriate container.

Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your Acura
dealer) is required to remove the
filter.

Install a new oil filter according to
the instructions that come with it.

Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:

Refill the engine with the
recommended oil.

Engine oil change capacity
(including filter):

Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine and check your work.

Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.

2.

3.

4.

5.

6.

7.

8.

CONTINUED

Changing the Oil and Filter

Maintenance

145

WASHER

OIL DRAIN BOLT

OIL FILTER

33 lbf·ft (45 N·m , 4.6 kgf·m)

5.3 US qt (5.0 )

Main Menu

Table of Contents