Acura 2004 NSX - Owner's Manual - Manual (Page 158)

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Remove the bulb by pushing it in
slightly and turning it
counterclockwise.
Install the new bulb into the
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
new bulb is working.
The bulbs for the taillights, tail/
stoplights, rear turn signals, and
back-up lights are behind the trunk
liner.
Pull the top edge of the trunk liner
out from under the rubber seal.
Remove the plastic clips holding
the trunk liner by putting your
thumbs under the head of the clip
between the liner and body and
pushing the clip outward as you
wiggle it back and forth.
2.
3.
4.
5.
1.
1.
Lights
Maintenance
Replacing a Front Turn Signal
Bulb Replacing the Rear Bulbs
155
Main Menu Table of Contents