beautypg.com

Indicator lights – Acura 2004 RL - Owner's Manual User Manual

Page 64

background image

If a brake light does not work, the

indicator comes on

when you push the brake pedal with
the ignition switch ON (II).

A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.

The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page

). Replace the bulb as

soon as possible, since other drivers
cannot see that you are signaling.

When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.

The appropriate light comes on in
this display if the trunk or any door
is not closed tightly.

All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch to ON (II).

291

Indicator Lights

Instruments and Controls

Brake Lamp Indicator

Turn Signal and
Hazard Warning
Indicators

Door and Trunk Open Monitor

61

BRAKE LAMP

Main Menu

Table of Contents