beautypg.com

Cooling system – Acura 2004 RL - Owner's Manual User Manual

Page 263

background image

Remove the two bolts and the
three nuts with a 7/16 in (10 mm)
wrench, then remove the engine
cover.

Loosen the bleeder bolt on top of
the engine.

Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:

Tighten the bleeder bolt when
coolant comes out in a steady
stream with no bubbles.

7.

8.

9.

10.

Cooling System

Maintenance

260

BLEEDER BOLT

BOLTS

NUTS

1.61 US gal (6.1 )

Main Menu

Table of Contents