Acura 2004 RL - Owner's Manual User Manual
Page 101
Press and release the MEMO
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver’s
seat, steering wheel, and outside
mirrors are now stored.
Your Acura has a memory feature
for the steering wheel, driver’s seat,
and outside mirror positions.
Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
Two seat, steering wheel, and
outside mirror positions for different
drivers or driving conditions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button.
Adjust the seat to a comfortable
position (see page
). Adjust
the steering wheel to a
comfortable position (see page
). Adjust the outside mirrors
for best visibility (see page
).
Store a driving position as explained
in this section only when the vehicle
is parked.
3.
1.
2.
Storing a Driving Position in Memory
Driving Position Memory System
Instruments and Controls
98
MEMO BUTTON
Main Menu
Table of Contents