Acura 2006 RL - Owner's Manual - Manual (Page 65)

This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. This indicator
will also come on when the light
switch is in AUTO and the lights
turn on automatically. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door.
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It will
then go off if you have a properly-
coded remote. If it is not a properly-
coded remote, the indicator will blink
and the engine will not start (see
page
).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to START (III). If
this indicator comes on at any other
time, there is a problem in the ABS.
If this happens, take the vehicle to
your dealer to have it checked. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. You will also see a
‘‘CHECK ABS SYSTEM’’ message
on the multi-information display (see
page
). For more information, see
page . If you use the built-in key, this
indicator blinks several times when
you turn the ignition switch from ON
(II) to the ACCESSORY (I) position.
If you use the remote, this indicator
blinks several times when you turn
the ignition switch from
ACCESSORY (I) to the LOCK (0)
position.
78
323
146
Instrument Panel Indicators
Lights On Indicator Immobilizer System
Indicator Anti-lock Brake System
(ABS) Indicator
64
Main Menu Table of Contents