beautypg.com

Collision mitigation brake system (cmbs) – Acura 2006 RL - Owner's Manual User Manual

Page 331

background image

The CMBS indicator normally comes
on under these conditions:

When you manually turn off the
system.

When the system shuts off
automatically.

When you drive in bad weather
(rain, snow, fog, etc.).

When the VSA system indicator
comes on (see page

).

When you turn the ignition switch
to the ON (II) position, the CMBS
indicator should come on for a few
seconds, then go off. If the
indicator comes on at any other
time and a CHECK CMBS
SYSTEM message appears on the
multi-information display, there is
a problem with the CMBS. You
can still drive your vehicle, but
CMBS will not be operating. Have
your vehicle checked by a dealer.

To turn the CMBS back on, make
sure the vehicle is stopped and the
ignition switch is in the ON (II)
position, then press the CMBS OFF
switch for about 1 second.

If anything covers the front grille
(dirt, mud, dry leaves, wet snow,
etc.).

339

Collision Mitigation Brake System (CMBS)

330

Main Menu

Table of Contents