Acura 2006 RL - Owner's Manual - Manual (Page 22)

CONTINUED
If you turn the ignition switch to the
ON (II) position before your seat
belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator stays
on without flashing.
If you do not fasten your seat belt
while driving, the beeper will sound
and the indicator will flash again at
regular intervals. You will also see a
‘‘FASTEN SEAT BELT’’ message on
the multi-information display (see
page
).
The lap/shoulder belt goes over
your shoulder, across your chest,
and across your hips.
To unlock the belt, press the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page
for how to
properly position the belt).
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body. The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passengers to
fasten your seat belts.
Your seat belt system includes lap/
shoulder belts in all five seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners and, on models with
ACC, seat belt e-pretensioners.
17
79
Seat Belt System Components
Lap/Shoulder Belt
Additional Information About Your Seat Belts
Dr
iv
er
and
P
asseng
er
Saf
e
ty
21
Main Menu Table of Contents