Acura 2006 MDX - Owner's Manual - Manual (Page 61)

The instrument panel has many
indicators to give you important
information about your vehicle.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals.
See page .
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position, see
page
for more information. If it
comes on at any other time, it
indicates a potential problem with
your front airbags or automatic seat
belt tensioners. This indicator will
also alert you to a potential problem
with your side airbags, passenger’s
side airbag automatic cutoff system,
driver’s seat position sensor, front
passenger’s weight sensors, or side
curtain airbags. For complete
information, see page
.
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. If it
comes on at any other time, it
indicates that the passenger’s side
airbag has automatically shut off.
For more information, see page
.
If you turn the ignition switch to the
ON (II) position before fastening
your belt, the beeper sounds and the
indicator flashes. If you do not fasten
your seat belt before the beeper
stops, the indicator stops flashing
but remains on.
32
32
32
273
272
272
Instrument Panel Indicators
Seat Belt Reminder
Indicator
Malf unction Indicator
Lamp
Low Oil Pressure
Indicator
Charging System
Indicator
Supplemental Restraint
System Indicator
Side Airbag Of f
Indicator
60
U.S. Canada