Acura 2006 MDX - Owner's Manual - Manual (Page 164)

Here are some guidelines for using
voice control:
To enter a command, press the top
of the TALK/BACK button. Then,
after the beep, say your command
in a clear, natural tone.
For best system operation, set the
climate control fan speed to low,
and direct the center vents away
from the microphone in the ceiling.
If the HFL does not recognize a
command, its response is, ‘‘Pardon.’’
If it doesn’t recognize the
command a second time, its
response is, ‘‘Please repeat.’’ If it
doesn’t recognize the command a
third time, it plays the Help
prompt.
To hear a list of available options
at any time, press the top of the
TALK/BACK button, wait for the
beep, and say, ‘‘Hands free link
help.’’
Many commands can be spoken
together. For example, you can
say, ‘‘Dial 123-456-7891.’’
To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, and 11.
To skip a voice prompt, press the
Talk button while the HFL is
speaking. The HFL will then begin
listening for your next command.
Signal Strength Indicates the
network signal strength.
ROAM Status (models without
navigation system)
Indicates
your phone is roaming.
Some phones will not send this
information to the HFL.
The HFL is operated by the HFL
TALK/BACK button on the left side
of the steering wheel. The next few
pages provide easy-to-use
instructions for all basic features of
the HFL.
All phones may not
operate identically, and some may
cause inconsistent operation of the
HFL.
:
CONTINUED
HandsFreeLink
Using Voice Control
How to Use the HFL
Fe
a
tu
re
s
163
NOTE:
TM