Acura 2007 MDX - Owner's Manual - Manual (Page 73)

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other time, there is a problem in
the SH-AWD system. You will also
see a ‘‘CHECK SH-AWD SYSTEM’’
message on the multi-information
display (see page ). Take your
vehicle to a dealer to have it checked.
For more information, see page .
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink,
and the engine’s fuel system will be
disabled. (see page ).
If the indicator blinks while driving,
it indicates the differential
temperature is too high.
You will also see a ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-information display (see page
).
82
82
128
340
SH-AWD Indicator Immobilizer System
Indicator
Instrument Panel Indicators
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
69
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
Main Menu Table of Contents