beautypg.com

Installing a child seat, 2009 mdx – Acura 2009 MDX - Owner's Manual User Manual

Page 53

background image

6. Attach the tether strap hook to the

tether anchor, then tighten the
strap as instructed by the child
seat maker.

7. Push and pull the child seat

forward and from side-to-side to
verify that it is secure.

Using the Center LATCH

To install a LATCH-compatible child
seat in the center seating position on
the second row seat, use the center
lower anchors as shown above.

1. Pull up the cover below the

armrest and find one of the
anchors. The other anchor is
located underneath the flap at the
bottom of the outer seat's inner
bolster.

2. Follow step 1 through 4 as

described previously to secure the
child seat.

3. Lower the head restraint first.

Route the tether strap over the
head restraint and seat-back, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.

4. Push and pull the child seat

forward and from side-to-side to
verify that it is secure.

Installing a Child Seat

49

Dr
iv

er
a

nd

Pa
sseng

er
Sa
fet

y

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu