beautypg.com

Changing a flat tire, 2009 mdx – Acura 2009 MDX - Owner's Manual User Manual

Page 434

background image

22. Slowly turn the wheel nut wrench

clockwise to take up the slack of
the hoist cable. Make sure the
bracket is seated in the center hole
of the flat tire.

23. Turn the wheel nut wrench

clockwise until the flat tire rests
against the underbody of the
vehicle and you hear the hoist
click.

Always raise the spare tire hoist, even if
you are not stowing a tire. If the hoist is
left down, it will be damaged during
driving and need to be replaced.

24. Store the jack in its holder. Turn

the jack's end bracket to lock it in
place. Store the tools, and install
the cover.

25. Refer to Changing a Tire with

TPMS (see page

355

).

Loose items can fly around the
interior in a crash and could
seriously injure the occupants.

Store the wheel, jack, and tools
securely before driving.

WHEEL NUT WRENCH

Changing a Flat Tire

430

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu