beautypg.com

Acura 2014 MDX - Owner's Manual User Manual

Page 462

background image

461

uu

Jump Starting

u

Han

d

lin
g the U

n

expected

5. Connect the other end of the second

jumper cable to the engine hanger as
shown.
Do not connect this jumper cable to any
other part.

6. If your vehicle is connected to another

vehicle, start the assisting vehicle’s engine
and increase its rpm slightly.

7. Attempt to start your vehicle’s engine. If it

turns over slowly, check that the jumper
cables have good metal-to-metal contact.

Once your vehicle’s engine has started, remove the jumper cables in the following
order.

1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster battery -

terminal.

3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +

terminal.

Have your vehicle inspected by a nearby service station or a dealer.

What to Do After the Engine Starts

14 ACURA MDX-31TZ56000.book 461 ページ 2014年2月26日 水曜日 午後4時53分