Acura 2014 MDX - Owner's Manual User Manual
Page 101
uu
Gauges and Multi-Information Display (MID)
u
MID
100
In
strum
e
nt Pa
nel
Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last
reset. Meters A and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the TRIP button until the trip
meter is reset to 0.0.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100
km (Canada). The display is updated at set intervals. When a trip meter is reset, the
average fuel economy is also reset.
■
Trip Meter
■
Outside Temperature
■
Average Fuel Economy
1
Switch between trip meter A and trip meter B by
pressing the TRIP button.
1
The temperature sensor is located in the front
bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the MID’s customized features to correct the
temperature.
1
You can change when to reset the average fuel
economy.
14 ACURA MDX-31TZ56000.book 100 ページ ２０１４年２月２６日 水曜日 午後４時５３分