P156, P156) – Acura 2014 MDX - Owner's Manual User Manual
Page 157
uu
Operating the Switches Around the Steering Wheel
u
Driving Position Memory System
156
Co
ntrols
1. Set the power mode to ON. Adjust the
driver’s seat, the steering wheel and the
door mirrors to the desired position.
2. Press the SET button.
u
You will hear a beep, and the memory
button indicator light will blink.
3. Press memory button
(
1
or
(
2
within five
seconds of pressing the SET button.
u
Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to
(
P
.
2. Apply the parking brake.
3. Press a memory button (
(
1
or
(
2
).
u
You will hear a beep, and the indicator
light will blink.
The seat, the steering wheel and the door
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beep, and the
indicator light stays on.
■
Storing a Position in Memory
1
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
•
You set the power mode to any position except
ON.
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position
1
The seat will stop moving if you:
•
Press the SET button, or a memory button (
(
1 or
(
2).
•
Adjust the seat, the steering wheel or the door
mirror position.
•
Shift into any position except
(
P.
Memory Buttons
14 ACURA MDX-31TZ56000.book 156 ページ ２０１４年２月２６日 水曜日 午後４時５３分