Acura 2014 MDX - Owner's Manual User Manual
Page 190
Continued
189
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
■
SYNC on and off
1. Select SYNC.
2. Select ON for synchronized mode.
u
When in synchronized mode, the front
passenger’s side temperature and the
rear passenger compartment become
the same as the driver’s side settings.
3. Adjust the temperature or change the
mode from the driver’s side.
■
Changing the fan speed
1. Select .
2. Change the fan speed with one of the
following:
The fan speed level indicators: Select your
desired speed level. The smaller indicator is
for a slower speed, and the larger for a
faster speed.
(
+
/
(
-
: To go up or down one level at a
time.
Fan AUTO: The system automatically
selects the fan speed most suitable to the
ambient environment.
1
When you press the
button, the system
synchronizes the driver's and front passenger's
temperature settings.
When the system is not in SYNC mode, the driver's
side temperature, the front passenger’s side
temperature and the rear passenger compartment (if
it is on) can be set separately.
You can also turn off SYNC mode by changing the
front passenger’s side temperature or rear
passenger’s temperature.
The system adjusts each temperature based on the
information of the sunlight sensor and the sun
position updated by the navigation system’s GPS.
Models with navigation system
1
While the climate control system is in AUTO, Fan
AUTO is highlighted.
Fan Speed Level Indicators
14 ACURA MDX-31TZ56000.book 189 ページ ２０１４年２月２６日 水曜日 午後４時５３分