A&D Weighing UC-321PL - Manual (Page 8)

8
Before Requesting Service
Problems Corrective Action
Nothing is displayed by pressing the
measurement switch. Check the battery installation.
Replace all four batteries with new
ones.
“88888” remains displayed.
“H” or “l” is displayed.
Remove and reinstall the batteries.
The difference between an estimated
weight and a measured weight is
excessive. Place the scale on a solid level
surface.
Remove any foreign objects that might
be touching the bottom of the scale.
When the scale is placed on a carpet,
be sure that the add-on feet are
attached or try moving the scale to a
level surface such as tile or wood.
“e- 0” is displayed. Replace all four batteries with new
ones.
If you can not locate and fix the problem, contact your supplier, or the A&D service
group. The A&D service group will support authorized suppliers with technical
information, spare parts and units.
3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPAN
Telephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148
A&D INSTRUMENTS LTD.
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire
OX14 1DY United Kingdom
Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485
A&D MERCURY PTY. LTD.
32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA
Telephone: [61] (8) 8301-8100 Fax: [61] (8) 8352-7409