A&D Weighing SE-150KAL - Manual (Page 23)

21
10-2. Function list
Item Parameter Description
0 Auto power-off disabled
Auto power-off
function
poff
Š 1 Auto power-off enabled
Turns the power OFF
automatically
0 Normal (1/3,000)
Weight display
resolution
r5eo
Š 1 High (1/6,000 or 1/7,500)
Changes “d”,
minimum display
Š 0 2400 bps
1 4800 bps
Serial interface
Baud rate
bp5 2 9600 bps
Š 0
Stream mode
Command mode
1 Command mode only
2
Print switch mode
Command mode
3
Auto-print mode +/- data
Command mode
Serial interface
Data output
mode
prt
4
Auto-print mode + data
Command mode
0 No reply except “Q” command
Serial interface
Response
aCk
Š 1 Reply to commands
Š 0 Comparator disabled
1 Compares all data
2 Compares all stable data
3 Compares data of > +4d or < -4d
4 Compares stable data of > +4d or < -4d
5 Compares data of > +5d
Comparator
mode
Cp
6 Compares stable data of > +5d
Comparison conditions
d = minimum display
0 Weak / fast response
Š 1 Normal / normal response
sStability
Response speed
Cond 2 Strong / slow response
0 Zero tracking function disabled Zero tracking
trc Š 1 Zero tracking function enabled
Tracks the zero drift
Š 0 Dot (.) Decimal point
dp 1 Comma (,)
Selects a decimal
point type
.
no Initialization disabled Initialization
Clrf go Initialization enabled
Restores the function
settings to the factory
setting values.
Š Factory setting
d = minimum display, the minimum mass that can be weighed
Even the counting mode uses “d” for judgment.