Cop y – Canon Speedlite 580EX II User Manual
Page 12
11
When you set the camera’s shooting mode to
(Full Auto), E-TTL II/E-TTL fully automatic flash will make it as
easy as normal AE shooting in the
1
Set the Speedlite to <a>.
Press the
is displayed.
2
Focus the subject.
Press the shutter button halfway to focus.
X
The shutter speed and aperture will
be displayed in the viewfinder.
Check that the icon is lit in the
viewfinder.
3
Take the picture.
Check that the subject is within the
effective range displayed on the LCD
panel.
X
Right before the shot is taken, a preflash
is fired, then the main flash is fired.
X
If a standard flash exposure was
obtained, the flash exposure confirmation
lamp will light for about 3 sec.
Fully Automatic Flash Shooting
will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera’s ISO speed.
A65_01.fm Page 11 Thursday, November 23, 2006 1:26 PM
COP
Y