Cisco 2960 User Manual

Page 5

Step 7

Connect a Category 5 Ethernet cable
to any 10/100 or 10/100/1000
Ethernet port on the switch front
panel.

Connect the other end of the cable to
the Ethernet port on your PC.

Step 8

Verify that the LEDs on both Ethernet ports are green. Wait 30 seconds.

Step 9

Start a web browser on your PC.
Enter the IP address 10.0.0.1 in the
web browser, and press Enter.

The Express Setup page appears. If it does not appear, see the “In Case of Difficulty” section
on page 16 for help. You entries should be in English.

DHCP-enabled PC

210109

Catalyst 2960

Series

CONSOLE

SPD

DPLX

STAT

SYST

MODE