Install the sfp modules and connect to the ports, Sfp module port – Cisco 2960 User Manual
Page 15
15
Install the SFP Modules and Connect to the Ports
Follow these steps:
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on
installing, removing, and connecting to SFP modules, see the documentation that came with the
SFP module.
Caution
Removing and installing an SFP module can shorten its useful life. Do not remove and
insert SFP modules more often than is absolutely necessary.
Step 1
Grasp the module on the sides, and insert it
into the switch slot until you feel the
connector snap into place.
Step 2
Insert an appropriate cable into the module
port.
Step 3
Insert the other cable end into the other device.
SFP module
210088
5x
6x
7x
8x
1
Catalyst 2960
S
eries
210089
5x
6x
7x
8x
1
Catalyst 2960
S
eries
SFP module port