Kistler-Morse KM SVS2000 - Manual (Page 9)

V. SETTING UP THE PROFIBUS MODULE
Once the signal processor is wired into the Profibus DP network with a valid node address and powered up, it
should be possible for the device to be added to the configuration of the PLC. A copy of the GSD is included
with the product and is located on the CD. The GSD can also be downloaded from the website,
www.kistlermorse.com. See the screen shots below of a typical installation.
5
www.kistlermorse.com
97-1501-12 Rev. B