Using your phone, Directory – Clarity D722 User Manual

Page 15

Transfer an External Call from Handset to Handset
During an external call:

1. Press

, then to select Intercom .
2. Press :

•

If you have two handsets, the outside call is put on hold and your
handset screen shows Calling other handset . The other handset
rings and its screen shows Other handset is calling .

•

If you have more than two registered handsets, your screen shows
Intercom to: Use the dial pad keys to enter a handset number.
The outside call is put on hold and your handset screen shows
Calling HANDSET X . The other handset rings and its screen
shows HANDSET X is calling .

3. The external call is put on hold automatically and the called handset

rings.

4. Press or on the called handset to

establish an internal call.

5. Press on the calling handset or put the calling

handset on the charging cradle to end the current call with the
external party.

6. The external call is transferred to the called handset.

Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets or a handset and base. The three parties can share the conversation
and no network subscription is required.

During an external call:

• Press or on the handset to establish the

conference call if another handset or the base has answered the call.

- OR -

• Press on the base to establish the conference call if

another handset answered the call.

USING YOUR PHONE

Your phone can store up to 100 directory entries with names and numbers.
Each directory entry can have a maximum of 24 digits for the phone number
and 15 characters for the name.

Add a New Directory Entry

1. In idle mode, press

, then to select

Directory .

2. Press

, then to select Add contact.
3. Press , then use the keypad to enter the number.

-OR-

Copy a number from redial list:

•

Press .

•

Press or press repeatedly to
locate the number to copy.

•

Press

to copy the number.

4. Press

, then use the keypad to enter the name.
5. Press to store the directory entry.

Note:
When entering the number and name:

•

Press or to move the cursor to the right or left.

•

Press and hold to enter a dialing pause (a P appears).

•

Press to erase a digit or character.

•

Press and hold to erase all digits or characters.

View a Directory Entry

1. In idle mode, press to access the directory.

-OR-

Press

, then to select Directory ,
then press twice to select Review .

2. Press or to view the directory entries. Entries appear

DIRECTORY

This manual is related to the following products:

D724