Clarity D722 - Manual (Page 14)

24 25
Note: Press to exit the directory, call log history or
redial list and return to the call without dialing the displayed number.
Redial list
You can redial up to 20 of the last numbers called. If you have stored a name
in the directory to go with the number, the name will be displayed instead. The
most recent last number will display at the top of the redial list.
To Seview the redial list entry
1. In idle mode, press to access redial list
2. Press , or press repeatedly to review the redial
list entry.
To Redial a Number from the Redial List
1. Follow the steps in the previous section.
2. Press or to dial the selected redial
number.
To Store a Redial Number into the Directory
1. Follow the steps in the section under “Review the redial list entry”
above.
2. Press
if necessary,
3. Press
To Delete a Redial Number
1. Follow the steps in the section under “Review the redial list entry” on
the preceding page.
2. While reviewing a number in the redial list, press to delete
the selected entry. A confirmation tone sounds.
3.
USING YOUR PHONE
Find the Handset
You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
Press on the telephone base. All the registered handsets will ring,
and the ** Paging** is flashing on handset screen.
To stop the paging tone:
• Press , , or any dial pad key (0-9 *, or
#) on the handset(s).
- OR -
• Press on the telephone base or put the handset in the cradle.
Make an Internal Call
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls.
Intercom Another Handset
1. In idle mode, press
Intercom.
2. Press
•
If you have two handsets, your handset screen shows Calling
other handset. The other handset rings and its screen shows
Other handset is calling.
•
If you have more than two registered handsets, your screen shows
Intercom to: Use the dial pad keys to select the other handset.
Your handset screen shows Calling HANDSET X. The other
handset rings and its screen shows HANDSET X is calling.
3. The called handset rings. Press or on
the called handset to establish the internal call.
USING YOUR PHONE