Handset audio operations, Using your phone – Clarity D722 User Manual
Page 12
20
21
Volume Control (earpiece and speakerphone)
During a call:
Press
setting is shown. When the volume reaches the minimum or maximum setting,
you hear two beeps. When you end the call, the setting will remain at the last
selected level.
Note: The handset earpiece volume setting (1-5) and speakerphone volume
setting (1-6) are independent.
Mute
Use the mute function to turn off the microphone while on a call. You can hear
the caller, but the caller does not hear you.
1. To mute the call
During a call, Press
shows Muted for a few seconds and the MUTE icon appears until you
turn off mute. Or mute is automatically canceled when you end the call.
Note: Mute will also be canceled automatically when you press
2. To un-mute the call
When mute is on, press
mute is off, Microphone on appears temporarily on the handset screen.
HANDSET AUDIO OPERATIONS
Make a Call
1. Pre-dialing
Enter the phone number first, then press
2. Direct Dialing
Press
the phone number.
3. Dial a speed dial number
In idle mode, press and hold a dial pad key (0 through 9) to display the
desired speed dial entry.
The handset automatically dials out the displayed number.
- OR -
Press
Note: You need to set the speed dial number first. If the speed dial
location you selected is empty, the screen shows the speed dial list
instead.
4. Call using the direct memory keys on base
In idle mode, press one of the Direct Memory Keys on the base, to dial
the number pre-stored into the keys. You need to set the Speed Dial
Memory keys first. See Speed Dial Numbers.
5. Call from Directory
1. In idle mode, press