FRITSCH LABORETTE 17, size II - Manual (Page 6)

1.2.1 Operating principle
The LABORETTE 17 combines a frequency generator and stainless steel
bath in one device. The ceramic oscillator generates high-energy vibra-
tions at the base of the bath, creating a cavitation effect (small bubbles
are constantly formed and implode) throughout the bath liquid. The
change in pressure caused by the cavitation dissolves stubborn soiling at
even the most inaccessible points.
1.3 Obligations of the operator
Before using the the LABORETTE 17, this manual is to be carefully read
and understood. The use of the the LABORETTE 17 requires technical
knowledge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The the LABORETTE 17 may exclusively be used within the scope of appli-
cations set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the functional capability of the LABOR-
ETTE 17 and for any damage or injury arising from failure to fulfil this
obligation.
By using the the LABORETTE 17 the customer agrees with this and recog-
nizes that defects, malfunctions or errors cannot be completely
excluded. To prevent risk of damage to persons or property or of other
direct or indirect damage, resulting from this or other causes, the cus-
tomer must implement sufficient and comprehensive safety measures
for working with the the LABORETTE 17.
Neither compliance with this manual nor the conditions and methods
used during installation, operation, use and maintenance of the the
LABORETTE 17 can be monitored by Fritsch GmbH. Improper execution
of the installation can result in property damage and thus endanger per-
sons. Therefore, we assume absolutely no responsibility or liability for
loss, damage or costs that result from errors at installation, improper
operation or improper use or improper maintenance or are in any way
connected to these.
The applicable accident prevention guidelines must be complied with.
Generally applicable legal and other obligatory regulations regarding
environmental protection must be observed.
1.4 Information on hazards and symbols used in this manual
Safety information in this manual is designated by symbols. Safety infor-
mation is introduced by keywords that express the extent of the hazard.
Safety information
Safety information and use
- 6 -