FRITSCH LABORETTE 17, size II - Manual (Page 18)

CAUTION!
Do not heat up disinfectants.
5.4 Information about the timer
Operating the timer:
n The device can remain connected to the mains while switched off.
n Disconnect from the mains by removing from the mains plug.
n The timer cannot be turned left when the device is switched off
(position “0”)!
5.5 Important information about temperature
Information about temperature:
n Heated-up cleaning liquid intensifies cleaning.
n At higher temperatures the effect of the ultrasonic cavitation
decreases again. The best cleaning results are achieved with
aqueous solutions in bath temperatures of up to 60 °C.
n Ultrasonic energy also heats up the cleaning fluid. With constant
noise and/or if the oscillating bath is covered, the liquid temperature
can exceed the set value on the thermostat more quickly.
n Do not heat up disinfectants.
n For the protection of the electronic components inside the ultra-
sonic device, the ultrasonic power is reduced at a critical tempera-
ture to prevent further increases in the interior temperature.
Using the planetary mill
- 18 -